Set Playback Format - Panasonic AG-HMC80PJ Operating Instructions Manual

■
Frame-playback
You can also play back videos one frame at a time
(frame-by-frame) or 15 frames at a time.
1) Press the up button on the cursor button during
playback (or the PAUSE button on the remote
control) to pause playback.
) Press the PAGE/ADV –/+ button (or the STILL
ADV button on the remote control).
• Hold down to continuously advance frame by
PHOTO
EXT
frame until the button is released.
SHOT
DISPLAY
• Press the STILL ADV button on the remote
DATE/
control during playback to continuously advance TIME
frame by frame. Press the PLAY button to cancel.
SEARCH PLAY
PAUSE
STILL ADV
SKIP STOP
ENTER
Video compatibility
• This camera supports the AVCHD format.
• This camera can play back the following video
signal types:
190×1080/60i, 190×1080/30P, 190×1080/4P,
1440×1080/60i, 180×70/60P, 180×70/30P,
or 180×70/4P
• Video recorded with other AVCHD-compatible
devices may not play back properly on this
camera. Similarly, video recorded with this
camera may not play back properly on other
devices.
• Audio is only included in normal playback.
• Thumbnails that appear as cannot be played
back.
START/
STOP
ZOOM
VOL
SEARCH
STILL ADV
SKIP
MENU

Set playback format

Set format for playback.
1
Press the FUNC/EXEC button.
The cursor moves to the operating menu.
2
Select [Playback format selection], and
press the ENTER button.
Playback format selection
3
Select the playback format and press the
ENTER button.
• Available playback formats:
1080/60i (30P), 1080/4P, 70/60P (30P),
70/4P
• Under default settings, the setting for the
REC FORMAT item in the setting menu
RECORD SETUP screen will be applied.
• Clips that cannot be played back will be
displayed with a red frame.
Even if the playback format is changed, the
format set in the REC FORMAT item on the
settings menu RECORD SETUP screen will
be restored when the camera is switched to
CAMERA mode.
41