Folding mechanism
1
2
3
4
Figure 79.
Folding mechanism (1 of 6)
5
6
7
Figure 80.
Folding mechanism (2 of 6)
ENWW
Remove the following FRUs:
• Front cover. See page 96.
• Back cover. See page 98.
• Stapling unit. See page 104.
• Flipper assembly. See page 115.
Face the back of the multifunction finisher.
Unplug three cable connectors (callout 1).
Remove the plastic e-clip (callout 2), and then remove the round plastic cover (callout 3)
from the timing-belt gear.
1
2
Face the right side of the multifunction finisher.
Open the jam-removal cover (callout 4).
Remove two screws (callout 5), and remove the metal frame panel.
4
2
2
2
3
2
5
2
Chapter 6 Removal and replacement 117