Jet-Link cable (interface cable)
1
2
3
Figure 91.
Jet-Link cable (1 of 2)
4
Note
Make sure that you do not drop the screw-holder (callout 5).
5
Note
If you cannot easily pull the cable-holder from the metal plate, use needle-nose pliers to pinch the
top and bottom edges of the cable-holder together.
Figure 92.
Jet-Link cable (2 of 2)
ENWW
Remove the back cover. See page 98.
Unplug one cable connector (callout 1) from the controller PCA.
Open the five cable clips (callout 2), and unroute the cable (callout 3).
3
2
Remove one screw (callout 4).
Unroute and remove the Jet-Link cable and the cable-holder (callout 6).
2 6
1
2
2
2
4
2
5
2
Chapter 6 Removal and replacement 125