Power Management Screen (Poweredge M915, M910, M710, M710Hd, M610 And M610X Only) - Dell PowerEdge M620 Owner's Manual

Option
Failsafe Baud Rate
(115200 default)
Remote Terminal Type
(VT 100/VT 220
default)
Redirection After Boot
(Enabled default)
Power Management Screen (PowerEdge M915, M910, M710, M710HD,
M610 and M610x Only)
Option
Power Management
CPU Power and
Performance
Management
Fan Power and
Performance
Management
Memory Power and
Performance
Management
Description
Displays the failsafe baud rate used for console redirection
when the baud rate cannot be negotiated automatically
with the remote terminal.
Select either VT 100/VT 220 or ANSI.
Enables or disables BIOS console redirection after your
system boots to the operating system.
Description
Options are OS Control, Active Power Controller,
Custom, or Maximum Performance.
If you select OS Control, Active Power Controller, or
Static Management Performance, the BIOS
preconfigures the remaining options on this screen. If you
select Custom, you can configure each option
independently.
Options are OS DBPM, System DBPM, Maximum
Performance, or Minimum Power.
Options are Maximum Performance or Minimum Power.
Options are Maximum Performance, a specified
frequency, or Minimum Performance.
Using the System Setup Program and UEFI Boot Manager
147