Changing The Position Of The Bottom Text Line; Using The Arc Text Tool - Brother BES-100E Workbook

NOTE: These settings are also available with the position-relative-to-baseline buttons (
bar.
Text
To change the position of the text in relation to the baseline:
1
Using the tool (
Move
appear around the shape.
2
Press the Enter key. The
3
In the
Position relative to baseline
NOTE: The
Text Effects
played by clicking the
4
Click the button.
OK

Changing the position of the bottom text line

With text shapes created using the
opposite side of the baseline compared with the top line of text.
Reverse bottom . The top and bottom text lines are on opposite sides of the baseline.
To change the position of the bottom line of text:
1
Using the
Move
the shape.
2
Click the
Text Effects
appears.
3
Select the
Reverse bottom
4
Click the button.
OK

Using the Arc Text tool (

This tool arranges text along an arc whose beginning, end and curve you can specify. The arc can bow either
up or down.
4
26
), select the text shape that you wish to change. "Dancing ants" (moving dashes)
Text Properties
group box on the
tab of the
Text Properties
Text Effects
Circular Text
tool ( ), select the text shape that you wish to change. "Dancing ants" appear around
button ( ) in the
check box. A check mark will appear.
)
Figure 42
3
1 2
dialog box appears.
tab, select the desired setting.
Text Effects
dialog box for the selected text shape can also be dis-
button ( ) in the
tool ( ), the bottom line of text can be positioned on the
Figure 41
bar. The
Text Text Effects
bar.
Text
tab of the
Text Properties
Figure 43
4
3
1
) in the
dialog box
2