Chapter 40: Setting Up The Printout Page - Brother BES-100E Workbook

Chapter 40: Setting Up the Printout Page

To setup the design printout:
1
On the drop-down menu, click
File
2
On the tab, type the name that should be printed in the
Header
address.
3
In the
Date information
NOTE: If you do not wish to print an item, clear the check box for the item. The check mark will disap-
pear.
4
On the tab, select the desired items to be printed.
Summary
NOTE: If you do not wish to print an item, clear the check box for the item. The check mark will disap-
pear.
If there is a check mark in front of an item in the
has not been entered into the database for that item, no information will be printed.
5
On the tab, select what will be printed in the
Layout
6
In the group box, select the position of the margins.
Margins
7
On the tab, select the print size in the
Sewout
NOTE: To specify a magnification, clear the
magnification value will be 100%. To change this, enter a value in the
design scale is printed at the lower-right side of the printout.
8
In the
Color sequence
9
In the group box, select if only the stitch data, only the outline data, or both is printed.
Detail
0
In the
Thread usage
bobbin thread used per design is printed.
A
On the tab, select the desired items to be printed.
Cost
NOTE: If you do not wish to print an item, clear the check box for the item. The check mark will disap-
pear.
The selected settings are retained for future printouts, unless the user changes them.
B
Click the button.
OK
Page Setup
and
User information
group box, select how the color sequence is printed.
group box, select if the amount of thread used per color per design or the amount of
. The dialog box appears.
Page Setup
Figure 118
Title
group boxes, select the desired items to be printed.
Customer information
group box.
Page
group box.
Print size
check box. The check mark will disappear, and the
Auto
box, usually the company name and
group box, but information
Magnification (%)
box. The
89