Using The Column Tool - Brother BES-100E Workbook

To add a path to the design:
1
Click the tool (
Path
moved into the design area.
2
Click in the design area to specify the placement of the punchpoints of the path.
NOTE: The tools in the
points. For more information, see chapter 22.
3
Right-click in the design area to finish the path.

Using the Column tool (

This tool adds columns (satin stitches) with a specified width to the design.
NOTE: This tool is available in the editing level of the software with .bdf files created using BE-100.
To add a column to the design:
1
Click the
Column
moved into the design area.
2
Click in the design area to specify the placement of the punchpoints of the column.
3
Right-click once in the design area.
4
Click in the design area to specify the desired width of the column, or right-click once to use the column
width set on the
drop-down menu).
NOTE: The tools in the
more information, see chapter 22.
48
) in the
Shapes
palette can also be used to select what type of line connects the punch-
Points
)
tool ( ) in the
Shapes
tab of the
Column BES Setup
palette are used to select what type of line connects the punchpoints. For
Points
toolbar. The pointer changes to large crosshairs (
Figure 84
toolbar. The pointer changes to large crosshairs (
dialog box (displayed by clicking
) when it is
) when it is
on the
BES Setup Options