Brother BES-100E Workbook page 55

A
On the drop-down menu, click
Edit
shown below.
B
On the drop-down menu, click
Zoom
C
Using the
Move
(moving dashes) appear around the polygon.
D
On the drop-down menu, click
Shape
when it is moved into the design area.
E
Click the
Punchpoint Straight
a star, and then right-click to close the hole outline.
F
Repeat step 15 to create a hole with a diamond shape.
G
Click the
Punchpoint Simple Arc
ating a hole in the shape of a circle, and then right-click to close the hole.
H
Right-click again to cut out the holes from the polygon so that it appears as shown in figure 88 above.
52
Paste
Fit to Window
tool ( ), select the rectangular polygon in the center of the banner. "Dancing ants"
Insert Polygon Hole
tool (
tool (
. The banner is placed in the center of the new design area, as
Figure 89
to display the entire design.
. The pointer changes to large crosshairs (
), and then click within the polygon to outline a hole in the shape of
Figure 90
), and then click within the polygon to specify punchpoints for cre-
)