Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 103

Chapter 9 Messages
9.2 Command Messages
■
STXV0235 ERROR Line["line number"] The Box ID of the target disk specified in the
copy set file is invalid.
[Meaning]
The Box ID of the Shadow Copy destination specified in the copy set file is invalid. The copy set file
cannot be registered.
[Action]
Correct the Box ID that is specified in the copy set file, and try again.
■
STXV0236 ERROR Line["line number"] A source disk and target disk with different
Box IDs cannot be set for the copy type specified in the copy set file.
[Meaning]
A source disk and Shadow Copy destination with different Box IDs cannot be set for the copy type
specified in the copy set file. The copy set file cannot be registered.
[Action]
Correct the copy set file, and try again.
■
STXV0237 ERROR Line["line number"] When the target disk is connected to the
production server, the copy set file cannot be created in format 2.
[Meaning]
When the Shadow Copy destination is connected to the production server, the copy set file cannot be
created in the Transportable Copy Configuration format (format 2). The copy set file cannot be
registered.
[Action]
Correct the copy set file, and try again.
■
STXV0238 ERROR Line["line number"] Too many generations specified in the
SnapOPC+ copy set information for a given source disk in the copy set file.
[Meaning]
The SnapOPC+ copy set information for a given source disk in the copy set file specifies more
generations than are allowed. The copy set file cannot be registered.
[Action]
Correct the copy set file, and try again.
103
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0