Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 112

Chapter 9 Messages
9.2 Command Messages
■
STXV0408 ERROR Failed to stop copy session. Disk = ["physical disk number"], Error
code = "error number,detailed error code"
[Meaning]
Failed to stop "physical disk number" copy session. Continue with next session to be stopped.
[Action]
Deal with the error according to the contents of the ETERNUS Disk storage systems "detailed error
code", and try again.
For more details about the "detailed error code", refer to
■
STXV0409 INFO Copy session was stopped. Disk = "physical disk number"
[Meaning]
The "physical disk number" copy session was stopped.
■
STXV0410 ERROR Internal inconsistency.
[Meaning]
Internal inconsistency. The process is canceled.
[Action]
Refer to "10.2 How to Obtain Error Information" (page 119), and prepare the required information
before contacting a Fujitsu field engineer (FE).
■ STXV0411 ERROR Stop process cannot be performed because the source disk to be
stopped cannot be found. Source-BoxID = "Box ID", Source-OLU = "OLU number"
[Meaning]
Stop process cannot be performed because the source disk to be stopped cannot be found. Continue
with next session to be stopped.
[Action]
Check the source disk to be stopped.
■
STXV0412 INFO Copy session was stopped. Source-Disk = "physical disk number",
Source-BoxID = "Box ID", Source-OLU = "OLU number", Target-BoxID = "Box ID",
Target-OLU = "OLU number"
[Meaning]
Copy session of "physical disk number" was stopped.
112
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
"9.3 Detailed Error Codes" (page 125).
P3AM-4582-03ENZ0