Setting Up For Hp-Ux 9.05 Or Later - Epson C82362 Administrator's Manual

Setting up for HP-UX 9.05 or later

In the following steps, substitute the name that your printer with
the interface card will be known by for HOSTNAME, and the
name by which you want your printer to be known for Rprinter.
1. Add the IP address and host name to the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2. Terminate the printer service.
For example:
lpshut
3. Create a printer.
For example:
lpadmin -pRPrinter -v/dev/null -mrmodel
-ormHOSTNAME -orpaux
4. Restart the print service.
For example:
lpshed
5. Enable the printer for use.
For example:
accept Rprinter
enable Rprinter
Use the lp command to print.
For example:
lp -DRPrinter Print-File-Name
8-6
Using the Interface Card with UNIX