Power Select Switch - Epson C82362 Administrator's Manual

10BASE-T (C82362 only)
Connect the Ethernet twisted-pair (10BASE-T) cable to the RJ-45
connector on the interface card.
10BASE-T/100BASE-TX (C82363 and C82364 )
Connect an Ethernet twisted-pair (Category-5) cable to the RJ-45
connector on the interface card. You can use this cable for both
10BASE-T and 100BASE-TX.
DC-IN connector (C82364 only)
Connect the AC adapter to the interface card.
c
Caution:

Power select switch

There is a power select switch on the board of interface card
models C82363 and C82364 .
c
Caution:
The default position is at P for C82363 , and at A for C82364 .
Do not change the position of the switch. You must use the default
position. Otherwise, the interface card will not work correctly.
1-4
Getting Started
Attach only one cable at a time.
For interface card models C82363 and C82364 , use a
Category-5 shielded twisted-pair cable to connect the
interface card, to prevent malfunctions.
The power select switch for model C82363