Using Nds Print Server (Netware 4.1X/5); Configuring The Interface Card Using Epsonnet - Epson C82362 Administrator's Manual

Using NDS Print Server (NetWare 4.1x/5)

This section contains instructions for using the interface card in
Print Server mode under NetWare 4.1x, IntranetWare, or
NetWare 5 with NDS mode.
Configuring the interface card using EpsonNet WinAssist
Configure the interface card using EpsonNet WinAssist.
Note:
Be sure that the one of the following Clients is installed in your computer;
Novell Client 32, Novell IntranetWare Client, or Novell Client.
1. Turn on the printer with the interface card.
2. From any NetWare client, log in to the target context of the
NDS tree as an ADMIN.
3. Run EpsonNet WinAssist from the Start menu.
4. Click IPX. Select the printer you want to configure from the
list, then click Configuration.
3-10
Using the Interface Card with NetWare