Instructions For Using Netware - Epson C82362 Administrator's Manual

Instructions for using NetWare

Printing a text file
When you print a text file using the NPRINT command of
NetWare or DOS, redirection, misconversion or a gap in
characters might occur depending on the client environment.
PCONSOLE limitation
To use the interface card in Print Server mode, you cannot use
the Print Server status display control with PCONSOLE.
Bindery and NDS
Bindery context path can be confirmed from the server
console by the SET BINDERY CONTEXT command.
If the bindery context path has not been set, or if you want to
use the print environment of another context from a non-NDS
client, it is necessary to specify the context for the bindery
context. Use SET BINDERY CONTEXT command to set the
context in the AUTOEXEC.NCF file.
You cannot use the bindery print server mode with EpsonNet
WinAssist if you are using Novell Client for Windows 95/98
version 3.00 or Novell Client for Windows NT version 4.50.
To configure the interface card for bindery mode, use Novell
IntranetWare Client or EpsonNet WebAssist.
See your NetWare 4.1x or NetWare 5 documentation for more
information.
IPX routing protocol "NLSP"
It is possible to set the "NLSP" IPX routing protocols from
NetWare 4.1x or later; however, the interface card does not
support NLSP. RIP/SAP controls the communication.
Using the Interface Card with NetWare
3
3-3