Status Alert Window - Epson C82362 Administrator's Manual

If the printer's power is off or there is a problem with the
network, the Get status every 20 sec check box is
automatically cleared. If this happens, make sure that the
printer's power is on and the printer is connected to the network,
then select the Get status every 20 sec check box again.
8. Click OK to save the settings.
9. Select the printer driver, and follow the on-screen instructions
to install the printer driver.
If a dialog box about installing EPSON Status Monitor 2 or
EPSON Status Monitor 3 appears, click Cancel and
terminate the installation.
Note:
If you are using EPSON Status Monitor 3 and printing from EpsonNet
Internet Print, the message "A communication error has occurred."
appears. To clear this message, right-click the printer icon, select
Document Defaults, and select the Utility tab. Then clear the
Monitor the Printing Status check box.

Status Alert Window

The EpsonNet Internet Print utility updates the status of the IPP
printer if you have selected the Get status every 20 sec. check
box in the EpsonNet Internet Print dialog box.
The status alert window appears when the printer is out of paper,
toner, or ink, if paper is jammed, the cover is open, or when the
printer is offline.
The EpsonNet Internet Print utility checks the printer status every
5 seconds during printing and every 20 seconds when idle. If you
do not want to check the printer status, clear the Get status every
20 sec. check box in the EpsonNet Internet Print dialog box.
EpsonNet Internet Print Utility
12
12-13