Installing The Driver - Epson 3865X Plus User Manual

Installing the Driver

Use the instructions in your AutoCAD documentation to
install the program on your hard disk. To install the drivers,
follow the steps below:
1. Copy the AutoCAD 9.0 driver files from your Utility 2
diskette to the directory on your hard disk containing the
AutoCAD program. Log onto your AutoCAD directory. To
copy the files, insert the Utility 2 diskette into drive A;
then type the following and press
COPY A:\ACAD9\*.*
2. Before running AutoCAD or AutoShade, you must load the
display driver into the computer's memory. First, log onto
your AutoCAD directory. Then type the display driver
program name at the MS-DOS prompt and press
For example, to load the 800
into memory, type the following and press
R3V1600
You can install the driver automatically each time you turn on
or reset your computer by placing the command in your
AUTOEXEC.BAT file. To modify the AUTOEXEC.BAT file
to load the 800
steps:
1. Type
of your hard disk.
2.
Type the following and press
COPY AUTOEXEC.BAT+CON AUTOEXEC.BAT
3. Type R3V1600 and press
4. Press F6 and then
A-12 Using the VGA Utilities
600, 16-color graphics driver, follow these
x
C : \
and press
Enter.
Enter:
600, 16-color graphics driver
x
Enter
to log onto the root directory
Enter:
Enter.
Enter.
Enter: