Leaving The Setup Menu - Epson 3865X Plus User Manual

If you have never set the real-time clock, the entry at the top of
the screen flashes to remind you to set the time and date. See
"Setting the Real-time Clock," above, for instructions.
To view the last Setup summary screen, press
your hard disk drive configuration(s):
Hard disk drive
Drive 1:
Number of cylinders
Number of heads
Number of sectors
Precomp. cylinder
Landing zone
Total capacity (MB)
Check each Setup summary screen to see if all the information
is correct. You can press
PgDn
to display the next screen.
If anything is incorrect, be sure Change settings is
highlighted and press
you can change the appropriate settings.

Leaving the Setup Menu

If you did not change any settings or you want to cancel the
changes you made, highlight Exit without saving
at a Setup summary screen and press
Menu appears. Press 0 and
time or date, the new setting takes effect even if you exit the
Setup program without saving your changes.)
Type 17
977
5
17
300
977
40.5
PgUp
Enter.
The main Setup menu appears and
Enter
Running the Setup Program
PgDn. You
Drive 2: None
Number of cylinders 0
Number of heads
Number of sectors
Precomp. cylinder
Landing zone
Total capacity (MB) .0
to display the previous screen or
Enter.
The Operation
to exit. (If you changed the
see
0
0
0
0
2-31