Setting The Processor Speed - Epson 3865X Plus User Manual

The Setup program requires a power-on password to turn on
network server mode. If you did not yet enter a password,
this message appears:
Set a power-on password first
To enter a password, highlight
and follow steps 3 through 5 above.
7. After you enter a power-on password and turn network
server mode on or off, highlight * * * *
SETTINGS * * * *
Setup menu.

Setting the Processor Speed

Your computer can operate at two
speed is 16 MHz and low speed simulates 8 MHz. When the
computer is set on high speed, it can access memory faster. Your
processor is set to operate at high speed unless you change it to
low or set the speed to change automatically.
You should use high speed for almost everything you do since
your programs work faster on high speed. However, certain
application programs have specific timing requirements for
diskette access and can run only at a slower speed; check your
application program manual.
When you set your processor to change automatically, the
computer switches to low speed whenever it needs to access a
diskette drive and runs at high speed for all other operations.
power-on password
Enter
and press
speeds:
Running the Setup Program
SAVE
to return to the main
high or low. High
2-11