Sony Handycam HDR-UX10 Operating Manual page 130

Pr++a+_+++++ a ++ ma++t++a+++ {g+++t++m++}
Onimagedatacompatibility
• hnage data tiles recorded on a "MelnoJy Stick
PRO Du(g' by your camcorder con_rm to tile
'+Design rule lor Camera File system ,+ universal
standard eshtb]ished by the JEITA/Japan
Electronics mid Inlol'mation Technology
[ndu!4ries Association).
• On your cmncozdez, you cannot play back still
images recorded on other devices (DCR-
TRVgO0 or DSC-D7(XI/D770) that do not
conlbl'm to the universal standm'd. (These
models are not sold in some regions.)
• If you cannot use a "Memory Stick PRO Duo"
that has been used with another device, lornlat it
with your camcorder (p. 78). Note that
lormatting erases all inlbrnlation on the
"Memoly Stick PRO Duo."
• You may not be able to play back images with
your canlcorder:
When playing back image data modified on
your conlptltcr.
When playing back image data lvcorded with
other devices.
Your camcorder operates only with an
"InfoLITHIIJM" battery pack/H series).
"hffoLITHIIJM" H series battery packs
have
the
_'_)+_fourn_q,,_+ ulark+
What is an "InIoLITHIUN" battery
pack?
An "InfoLITHIUM" battery pack is a
lithium-ion battery pack that has functions
for communicating information rehtted to
operating conditions between your
camcorder and an optional AC Adaptor/
charger.
The "hffoLITHIUM" battery pack
calculates the power consumption
according to the operating conditions of
your camcorder, and displays the remaining
battery time in minutes.
With an AC Adaptor/charger. the remaining
battery time and charging time appear.
To chargethe batterypack
• Be sure to cbrge tile battery pack belore you
st_lrl t/Sillg yotlr c_tnlcorder.
• We l+cconunend charging tile battery pack in an
ambient temperuture of between IO °C to 30 W"
150 OF to 86 OF) until tile CHG (charge) l+unp
turns off. If you charge the battery pack outside
of this temperature range, you may not be able
to charge it eRiciently.
• ARer charging is complete, disconnect file cable
Rom tile DC IN jack on your camcorder or
remove tile baltery pack.
To use the batterypack effectively
• Battery pack pertormmlce decrea_s when tile
surrounding temperature is 10 °C (50 OF) or
below, and the length of time you can use the
battery pack becomes shorter. In that case, do
one of tile following to use tile battely pack k)r a
longer time.
Put tile battery pack ill a pocket to warm it lip.
and insert it in your camcorder right belore
you start taking sbols+
Use a large capacity bauely pack: NP-FH70/
NP-FH 1O0/optional ).
• Frequent use of tile LCD screen or a licquent
playback, last lorward or rewind operation
wears Oil[ the bauely pack l_lslcr.
We recommend using a large capacity battery
pack: NP-FH70/NP-FHI00/optkmal).
• Be sure to set the POWER switch to OFF
(CHG) when not recording or playing back on
your camcorder. The battery pack is also
consullled when
your callicorder is in recording
standby or playback pause.
• Have spare battc W packs ready lot two or three
times the expected recording time. and make
trial recordings belbrc making die actual
recording.
• Do not expose the bauery pack to water. The
battery pack is not walcr rcsisl_lnI,
130