Turning On Your Equipment; Turning On The Projector - Epson PowerLite 720c User Manual

caution
Do not use the projector with
the lens cap in place. The
heat generated by the lens can
damage the cap.
Using the Projector
20

Turning On Your Equipment

Make sure your projector and other equipment are set up and
connected correctly, as described in Chapter 1 or Appendix A. Then
turn on your projector, as described below, followed by any
equipment you've connected to it. You can turn on your computer
and video equipment in any order, but if you have both a computer
and video source connected, you may have to switch to the desired
source as described on page 21.

Turning On the Projector

Follow these steps to plug in and turn on the projector:
1. Connect one end of the power cord to the projector's power inlet.
2. Connect the other end to an electrical outlet.
The power light on top of the projector turns orange, indicating
that the projector is receiving power but not yet turned on.
3. Remove the lens cap.