Resetting The Lamp Timer - Epson PowerLite 720c User Manual

Maintaining and Transporting the Projector
56

Resetting the Lamp Timer

You must reset the lamp timer after replacing the lamp to clear the
warning message. Follow the directions below to
LAMP REPLACE
reset the lamp timer:
1. Press the button. You see the main menu.
Menu
2. Use the directional buttons to highlight
following:
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
: Select : Enter
3. Press to select the About menu.
Enter
4. Press to select the
Enter
following:
5. Use the directional buttons to select
6. Press to return to the main menu.
Esc
7. Press again (or the
Esc
About
Lamp : 0H
Reset Lamp Timer Execute
Video Source : Computer
Input Signal : Analog-RGB
Frequency : H ---.--kHz
V ---.--Hz
SYNC Polarity : H ------
V ------
SYNC Mode : ------
Resolution : 0x 0
Refresh Rate : 0.0 Hz
option. You see the
Reset Lamp Timer
Reset Lamp Timer
Execute?
YES NO
and press
Yes
button) to exit the menu system.
Menu
. You see the
.
Enter