Creating Your Own Startup Screen
You can transfer any image on your computer to the projector, and
then use it as the screen displayed when the projector is not receiving a
signal. You can also set it to be displayed when you press the
button, or as a startup screen. The image can be a company
A/V Mute
logo, slogan, photograph, or any other image you want to use.
Capturing the Image
Start by displaying the image you want to use on the projector. You
can use an image from either a computer or video source such as a
VCR or digital camera. Then follow these steps to capture the image
and transfer it to the projector:
1. Press the
button on the remote control. You see the main
Menu
menu.
2. Use the directional buttons to highlight the
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
: Select
: Execute
3. Press
to select it. You see a message like the one at the right.
Enter
4. Select
and press
YES
image.
5. Use the directional buttons to select the area of the image you
want to use. Once you have selected the area, press
Execute
. A selection box displays over the
Enter
menu.
User's Logo
.
Enter
Fine-tuning the Projector
User's Logo
Do you use the present image as a
user's logo?
YES
NO
: Return
: Select
: Execute
43