Adjusting The Image; Repositioning The Image; Adjusting Image Appearance - Epson PowerLite 720c User Manual

note
If you have repositioned the
image, you can use the
button on the remote
Auto
control to restore the default
settings.
Fine-tuning the Projector
40

Adjusting the Image

The Video menu lets you make adjustments to the projected image.
The options available in the menu depend on which image source is
selected: computer or video.

Repositioning the Image

Follow these steps to fine-tune the image position:
1. Press the button. You see the main menu.
Menu
2. Press to select the Video menu.
Enter
3. Press to select the
Enter
adjustment screen.
4. Use the directional buttons to move the image left, right, up, or
down.
5. When the image is positioned the way you want, press

Adjusting Image Appearance

Follow these steps to adjust the appearance of your image:
1. Press the button. You see the main menu.
Menu
2. Press to select the Video menu.
Enter
3. Use the directional buttons to set the following options:
■
Tracking (computer images only)
Removes unwanted vertical lines from a computer image by
matching the projector's internal clock to various computer
signals.
■
Sync (computer images only)
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
■ Auto Setup (computer images only)
Leave this setting
image. Turn it off if you want to save adjustments you have
made to the video settings.
option. You see the
Position
to automatically optimize the computer
ON
Position
.
Esc