Department Shift; Happy Hour - Sharp ER-A770 Instruction Manual

Department shift

Procedure
For example, PLU code 1 belongs to the department 12 and the
30. Under this case, when the
updated.
Generality: (Offset value) + (the lowest digit of associated dept.) = shift dept. code

Happy hour

You can program the date/time range for each happy hour (Happy hour 1 – Happy hour 7). When a clerk
enters a PLU code, the price level for which you have programmed a time range will be automatically
entered. For example, if you program the time range 9:00 AM to 11:00 AM for shift level 2, only the price
level is shifted from 9:00 AM to 11:00 AM.
Procedure
Select a pertinent happy hour from
the list.
150
Program the item as follows:
• DEPT. SHIFT 1 through 4 (Use the numeric entry)
Enter an offset value for each department shift key (max. 2
digits).
NOTE
If an associated department code which was changed by the
¿
through
will occur.
/
key and PLU code 1 are entered, the department 32 totalizers are
Program the item as follows:
• START DATE (Use the numeric entry)
Start date: month/day (0101 to 3112)
• END DATE (Use the numeric entry)
End date: month/day (0101 to 3112)
• START TIME (Use the numeric entry)
Start time: hour/minute (0000 to 2359)
• END TIME (Use the numeric entry)
End time: hour/minute (0000 to 2359)
• SHIFT LEVEL (Use the numeric entry)
Shift level (1 to 7)
Active price level = Price level + (Shift level - 1).
NOTE
When the starting and ending date/time are set at "0000," or shift
level is 1, the "Happy hour" function is not available.
keys is "00," it will not change. In this case, an error
/
key is programmed for the offset value
/