System Connections - Sharp AN-PR1500H Operation Manual

System connections

Installing the main unit and the subwoofer
1. Pull up both speakers outwards.
2. Turn the unit. Place the glass shelf on top of it.
Top glass cover cushion
Wooden shelf
3. Place the wooden shelf on top of the screw.
4. Cover the screws on the speakers with the screw covers provided.
Protection
sheet
Top glass cover
Sticker up side
Screw cover
Notes:
It is advisable for the top glass cover to be carried by 2 persons.
Top glass with sticker on its surface, must face upwards.
The maximum load for the top glass cover on the unit is 80 kg.
The glass are made of reinforced glass, but dropping pointed objects on them or strongly
hitting the surface may cause them to break.
The top glass cover and wooden shelf board are not fastened to the unit. Always take care
the unit level when transporting it. Otherwise these parts may fall off and there is a risk of
damage and injury.
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket
and position the FM aerial wire in the direction where
the strongest signal can be received.
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup.
Place the aerial away from the unit for better reception.
External FM aerial
Use an external FM aerial if you require better reception. Consult your dealer.
75 ohms
coaxial cable
Note:
When an external FM aerial is used, disconnect the supplied FM aerial wire.
FM
aerial
External
FM aerial
AN-PR1500H
13