Timer And Sleep Operation (Remote Control Only) - Sharp AN-PR1500H Operation Manual

Timer and sleep operation (Remote Control only)

Timer playback:
The unit turns on and plays the desired source (DVD/CD, USB, TUNER, DIGITAL 1,
DIGITAL 2, DIGITAL 3, LINE 1, LINE 2, LINE 3, SCART) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play works for one time only at a preset time.
Daily timer: Daily timer play works at the same preset time every day.
For example, set the timer as a wake-up call every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio programme, and use the daily
timer to wake up.
1 Set the daily timer (pages 57 - 58).
2 Set the once timer (pages 57 - 58).
1 minute or more
Daily timer
Start Stop
Note:
When the setting times for daily timer and once timer overlap, the once timer takes
priority. Allow an interval of at least 1 minute between operations.
1
4
7
0
Once timer
Start Stop
2 3
5 6
8 9
+10
Timer playback
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 28).
If it is not set, you cannot use the timer function.
2 For timer playback: Load discs to be played.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
"DAILY", and press the MEMORY/DIMMER button.
Set the clock to the correct time if "ONCE" or "DAILY" does not appear.
4
Within 10 seconds, press the
SET" or "DAILY SET", and press the MEMORY/DIMMER button.
5
Press the or button to adjust the hour and then press the
MEMORY/DIMMER button.
The illustrations show the timer playback setting in the daily timer mode.
6
Press the or button to adjust the minutes and then press the
MEMORY/DIMMER button.
or button to select "ONCE" or
or button to select "ONCE
Continued to the next page
AN-PR1500H
57