Volume Control - Sharp AN-PR1500H Operation Manual

Volume auto fade-in
If you turn off and on the main unit with volume set to 34 or higher, the volume
starts at 20 and fades in to the last set level.
If you turn off and on the main unit with the volume level set to less than 34, the
volume starts at the last level volume setting.

Volume control

Main unit and remote control operation:
Press the VOLUME (+ or –) button to increase or decrease the volume.
Subwoofer level control
The subwoofer level can be adjusted.
To increase the level, hold down the SHIFT button
and press the SUBWOOFER LEVEL + button.
To decrease the level, hold down the SHIFT button
and press the SUBWOOFER LEVEL - button.
Note:
When sound from the subwoofer is distorted, decrease the subwoofer level.
0 1 ...
39 MAX
-4 ...
-5 +4 +5
Function
When the FUNCTION button on main unit is pressed, the current function will change
to different mode. Press the FUNCTION button repeatedly to select desired function.
SCART DVD/CD
LINE 3 LINE 2 LINE 1
Pressing the AUX button on the remote control repeatedly will change the function to
different modes as below:
DIGITAL 1
LINE 3
SCART
Note:
The backup function will protect the memorised function mode for a few hours should
there be a power failure or the AC power lead becomes disconnected.
USB TUNER DIGITAL 1
DIGITAL 3 DIGITAL 2
DIGITAL 2 DIGITAL 3
LINE 2 LINE 1
AN-PR1500H
27