General Control - Sharp AN-PR1500H Operation Manual

General control

AN-PR1500H
26
1 2 3
4 5 6
7 8 9
0 +10
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Auto power on function
When you press any of these buttons during stand-by mode, the unit turns on.
FUNCTION button (main unit): The unit turns on and the last of previous function is
activated of DVD/CD or USB.
button (main unit): The unit turns on and start playback the last of previous
function of DVD/CD or USB.
DVD/CD button (remote control): The unit turns on and the "DVD/CD" function is
activated.
USB button (remote control): The unit turns on and the "USB" function is activated.
AUX button (remote control): The unit turns on and the last of previous function is
activated. (DIGITAL 1/DIGITAL 2/DIGITAL 3/LINE 1/LINE 2/LINE 3/SCART).
TUNER button (remote control): The unit turns on and the "TUNER" function is
activated.
USB button (remote control): The unit turns on and start playback the "USB"
function.
DVD/CD button (remote control): The unit turns on and start playback the
"DVD/CD" function.
Auto power off function
In the stop mode of discs/USB operation, the main unit enters the stand-by mode
after 15 minutes of inactivity.
Illumination light control
Press the MEMORY/DIMMER button for more than 2 seconds to adjust the
brightness of the display.
Display bright
Display dim
Display gets dimmer