Adjusting The Volume; Selecting The Image Source; Automatically Detecting The Source (Source Search) - Epson PowerLite S4 User Manual

Adjusting the Volume

Adjusting the Volume
The volume of the projector's built-in speaker can be adjusted as follows.
Remote control
When the button is pressed to the [
it is pressed to the [ ] side, the volume decreases.
The volume gauge appears on the screen when the volume is being adjusted.
• If the value displayed in the gauge on the screen stops changing when the
p
volume is being adjusted, it indicates that the limit for volume adjustment
has been reached.
• The volume can also be adjusted using the configuration menu. See
34.
] side, the volume increases, and when

Selecting the Image Source

The image source is the projector port to which your video equipment is
connected. You can select the image source automatically, using Source
Search as described below. Or you can select a source yourself as described
on page 18.

Automatically Detecting the Source (Source Search)

Source Search automatically detects the picture signal from connected
equipment and projects the image.
1 Turn on your computer or video equipment. If you are viewing a
tape or DVD, start playback.
2 Press the Source Search button.
Using the Remote Control
page
17
Using the Control Panel