Replacing Consumables
Replacing the Air Filter
If the air filter is broken or if a warning message reappears after it has been
cleaned, it should be replaced.
The air filter can be replaced even if the projector is installed on a ceiling.
1
Turn off the projector's power, wait until it beeps twice, and
disconnect the power cable.
2
Remove the air filter.
Put your finger into the recess of the air filter and slide it out to remove
it.
Recess
3
Install the new air filter.
Slide in the new air filter and press until it clicks into place.
Dispose of used air filters properly in accordance with your local
p
regulations.
Air filter frame: Polycarbonate, ABS plastic
Filter: Polyurethane foam
44