Setting Up the Projector
Setting Up the Projector
The projector supports the following four projection methods, allowing you to
choose the best method for displaying your images.
• For ceiling mount installation (suspending from the ceiling), a special
c
installation procedure is required. Failure to install correctly may
result in injury or damage if the projector falls.
• Do not turn the projector on its side during projection, or malfunctions
may occur.
• To prolong the life of the projector, turn it off when not in use.
◗ Front projection (Front projection)
◗ Rear projection using a translucent screen (Rear projection)
◗ Front/ceiling projection (Front/Ceiling projection)
◗ Rear/ceiling projection using a translucent screen
(Rear/Ceiling projection)
• The optional ceiling mount is required when installing the projector on
p
a ceiling. See
page
58.
• When using ceiling projection or projection using a translucent
screen, set the "Projection" command in the "Extended" menu to
match the installation method. See
6
page
35.