Epson PowerLite S4 User Manual page 29

Saving a User's Logo
3 When "Choose this image as the User's Logo?" appears, select
"Yes".
When you press the [Enter] button, the image will be displayed at its
p
original resolution. For example, if a video image or an image with a
resolution that is different from the projector's native resolution is being
displayed, the image size will change.
4 The image to be recorded and a selection marquee box will be
displayed. Move the marquee box to select the part of the image
to use.
Using the remote control Using the control panel
p
User's logos can be saved at up to 400 × 300 dots in size.
5 When "Select this image?" appears, select "Yes".
6 Select the zoom rate from the Zoom rate setting screen.
7 When "Save this image?" is displayed, select "Yes".
The image will then be saved. Once the image has been saved, the
message "Completed." will be displayed.
• Saving the user's logo may take a few moments (about 15 seconds). Do
p
not use the projector or any other sources which are connected to the
projector while the user's logo is being saved, otherwise it may result in
errors in projector operation.
• Once a user's logo has been saved, the logo setting cannot be returned to
the factory default.
29