Problems Relating To Images; No Images Appear; Projection Stops Automatically; The Message "Not Supported." Is Displayed - Epson PowerLite S4 User Manual

Problem Solving

Problems relating to images

No images appear

Check
Was the [Power] button pressed?
Are the indicators switched off?
Is A/V Mute mode active?
Have the configuration menu settings been made
correctly?
Is the projected image completely black?
Are the image signal format settings correct?
Is the lens cover still closed?

Projection stops automatically

Check
Is "Sleep Mode" set to "On"?

The message "Not Supported." is displayed

Check
Are the image signal format settings correct?
If you're projecting from a computer, does the mode
match the frequency and resolution of the image
signals?
Press the [Power] button to turn the power on.
The power cable is not connected correctly or power is not being supplied normally. Connect the projector's power
cable correctly. See the Quick Setup sheet.
Check that your power supply socket is working.
Press the [A/V Mute] button on the remote control to cancel the mute. See
Reset all of the settings. See page 38.
Some input images, such as screen savers, may be completely black.
If a composite video or S-video source is connected to the projector, use the "Video Signal" menu command to
select the signal format. See page 33.
Open the lens cover.
If you do not want sleep mode to be used, change the "Sleep Mode" setting to "Off". See
If a composite video or S-video source is connected to the projector, use the "Video Signal" menu command to
select the signal format. See page 33.
Refer to the documentation provided with your computer for details on changing the resolution and frequency of
the image signals being output from the computer. See
Remedy
page 19.
Remedy
Remedy
"List of Supported Monitor Displays" on page
51
page 36.
63.