Connection; Network Interface - Sharp AR-PB2 Operation Manual

Digital copier printer expansion kit

Hide thumbs Also See for AR-PB2:

Table of Contents

GETTING STARTED

Connection

1. Make sure both the printer and the computer are turned off.

2. Plug one end of the printer cable into the printer and the other end into the computer's parallel

connector.

In order to have best performance, make sure to use shielded parallel cable.

NOTES

For specifications of the parallel interface of your computer, see its operation manual.

The printer sends and receives data bi-directionally and at high speed. Some switch boxes cannot support high-speed bi-

directional data transfer and using them might cause printing errors.

For further details on the specifications of the printer's parallel interface, consult an authorized Sharp dealer.

The printer can also be connected to a network using an optional network interface card (Print

Server Card) supplied by authorized Sharp dealers. For details on network interface, see the

operation manual of the network interface card.

For additional network utilities, see the separate supplemental manual.

Figure 1-1. Connecting the Printer Interface Cable

Table of Contents