Interrupting And Canceling Print Jobs; Key Operator Programs - Sharp AR-PB2 Operation Manual

Tray Change Procedure:
1. Press the "ONLINE/OFFLINE" key on the touch panel (Figure 4-1) to set the printer to an offline
state.
2. Press the "PAPER SELECT" key to select the desired paper tray.
3. Press the "ONLINE/OFFLINE" key to return the printer to an online state. The printer will begin
printing from the selected tray.
Selecting a tray containing a different size or orientation of paper than that specified by the computer may result in
NOTES
the pages being clipped to fit the physical paper size.
Note that using the "PAPER SELECT" key to select a new paper tray overrides any selection previously made using
the printer driver configuration menus.

Interrupting and Canceling Print Jobs

To interrupt a print job while the printer is printing, press the "ONLINE/OFFLINE" key on the touch
panel (Figure 4-1). The printer will go off line and stop printing. A message will appear on the touch
panel. To resume printing, press the "ONLINE/OFFLINE" key again to return the printer to the
online status. The printer will go online and resume printing.
While the printer is in the offline mode, the print job can be canceled by pressing the CLEAR key.
Lastly, press the "ONLINE/OFFLINE" key to return the printer to online status. Now the printer is
ready for the next print job.

Key Operator Programs

A variety of key operator programs are available which allow a key operator to adjust certain printer
features, functions, or operating conditions. These programs are listed in this section. (Refer to
Table 4-1.)
Key operator programs governing printer features and functions can be called in the same manner
as the key operator programs governing copier features.
For general information on accessing key operator
programs, including registration of a key operator
code number, refer to the Key Operator's Guide in
the copier manual.
If the printer expansion kit has been installed, the
"PRINTER" key will be displayed on the touch panel
after the key operator code number is entered.
Press the "PRINTER" key to access the key
operator programs for the printer features.
USING THE OPERATION PANEL
KEY OPERATOR PROGRAMS
TOTAL COUNT.
35
COPIER PRINTER
PROGRAM LIST
PRINTOUT.
EXIT