Advanced Printing Techniques - Sharp AR-PB2 Operation Manual

ADVANCED PRINTING TECHNIQUES

NOTES All pages in a print job must be of the same size to be stapled.
For stapling at the proper position, portrait orientation is needed.
The number of pages must not exceed the stapling limit (30).
Stapling with 3-tray finisher (AR-FN1):
For stapling, the offset tray and face up must be specified for output. The stapling positions can be
selected as shown in the illustration below.
Position 1
Position 2
Position 3
The stapling positions are specified with '1 staple' or '2 staples'. The actual stapling positions on
printed sheets depend on the orientation of the document and paper size as shown below.
Print
Portrait
Landscape
NOTES All pages in a print job must be of the same size to be stapled.
The number of pages must not exceed the stapling limit of 50 for A4 and letter, and 25 for other sizes.
Stapling positions
2 staples
1 staple
2 staples
1 staple
2 staples
1 staple
2 staples
1 staple
A4, B5,
letter
A4, B5,
letter
A4, B5,
letter
• Long edge of paper is fed.
• Allowable paper sizes are A4, B5, and letter (up to 50 sheets).
• If the selected paper tray becomes empty and another tray with
the same paper size in the different orientation is selected,
printing can be continued but stapling will not be performed.
• Short edge of paper is fed.
• Allowable paper sizes are A3, B4, A4, and letter (up to 50
sheets for A4 and letter and 25 sheets for the other sizes).
• Long edge of paper is fed.
• Allowable paper sizes are A4, B5, and letter (up to 50 sheets).
• If the selected paper tray becomes empty and another tray with
the same paper size in the different orientation is selected,
printing can be continued but stapling will not be performed.
• Short edge of paper is fed.
• Allowable paper sizes are A3, B4, A4, and letter (up to 50
sheets for A4 and letter and 25 sheets for the other sizes).
24
A3, B4, A4, ledger,
legal, letter,
foolscap
A3, B4, A4, ledger,
legal, letter,
foolscap
A3, B4, A4, ledger,
legal, letter,
foolscap
Condition