Hitachi XP P9500 User Manual page 228

Setting
AFB
off
Legend:
AFB: Automatic failback
IEM: Intermittent error monitoring
#1
When this condition is not satisfied, the KAPL01080-W message is output
and an error occurs. The status of intermittent error monitoring does not
change.
#2
Because automatic failback is off, intermittent error monitoring is
disabled.
Example
-lic
Specify this option for when a license is updated. The HDLM license is
provided via a license key or license key file. A license key file is a file
that stores the HDLM license key.
If a license key file is provided:
If a license key is provided:
6-26
Available operation
IEM
Set IEM to on.
Set AFB to on.
#2
on
Set AFB to off.
Set AFB to on.
off
Set AFB to off.
The following example shows how to monitor for intermittent errors.
# /usr/DynamicLinkManager/bin/dlnkmgr set -iem on -intvl 20 -
iemnum 2
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation
name = set, completion time = yyyy/mm/dd hh:mm:ss
#
Store the license key file named hdlm_license directly under /var/
tmp, and then execute the set -lic operation. A message confirming
that the license key has been registered is displayed, depending on
the license key type defined in the license key file. When a temporary
license key or emergency license key has been registered, the
expiration period is displayed (KAPL01071-I, KAPL01072-I).
Command Reference
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Result of operation
#1
IEM is enabled.
AFB and IEM are enabled.
The operations of AFB and IEM do not
change.
AFB is enabled.
The operations of AFB and IEM do not
change.
#1