Hitachi XP P9500 User Manual page 89

21 Make sure that hdisks are available:
.
# lsdev -Cc disk
hdisk0 Available 1S-08-00-8,0
hdisk1 Available 1S-08-00-9,0
hdisk2 Available 1S-08-00-10,0 16 Bit LVD SCSI Disk Drive
hdisk3 Available 1H-08-02
hdisk4 Available 1H-08-02
...
Make sure that the status of all displayed hdisks is Available.
hdisks 0 to 2 are the physical device file names for the host's internal
disks.
hdisk 3 and the following are the logical device file names that correspond
to physical volumes in the storage system.
22 Execute the dlnkmgr command's view operation to check the status of
.
each program:
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size (KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Intermittent Error Monitor
HDLM Manager Ver
Alive x.x.x-xx
HDLM Alert Driver Ver
Alive
HDLM Driver Ver
Alive x.x.x-xx
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
Even if cluster software is used, the name of the cluster software is not
displayed in Support Cluster. However, the cluster support function is
operating normally.
23 From the execution result of the view operation, check that the correct
.
version of HDLM is installed.
If HDLM Version is x.x.x-xx, the installed version of HDLM is correct.
x.x.x-xx is the installed version of HDLM.
24 From the execution result of the view operation, check that the programs
.
are running properly.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive, all
programs are running correctly.
If you are not using a virtual I/O server, go to step 28.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
16 Bit LVD SCSI Disk Drive
16 Bit LVD SCSI Disk Drive
Hitachi Disk Array (Fibre)
Hitachi Disk Array (Fibre)
: x.x.x-xx
:
: on(extended lio)
:
: 3
: 9900
: 2
: 0
: 1000
: 4
: on(30)
: on(60)
: off
WakeupTime
yyyy/mm/dd hh:mm:ss
WakeupTime
x.x.x-xx yyyy/mm/dd hh:mm:ss 4000
WakeupTime
yyyy/mm/dd hh:mm:ss
ElogMem Size
3-27