Notes After Installing The Mounter; Measuring Color; Starting Spectroproofer Utilities; Color Calibration - Epson SpectroProofer Mounter 17 User Manual

SpectroProofer Mounter 17"
Notes After Installing the
Mounter
The following restrictions apply when using the printer
with the mounter.
❏ The minimum paper length is 210 mm when using
auto cut (normally 80 to 127 mm).
❏ Only one single cut sheet can be stacked. This
applies to all paper types.
❏ You cannot feed paper manually from the front of
the printer.
❏ You cannot cut four-sided borderless roll paper.
Also, note that the following may occur during color
measurement.
❏ Glossy paper surfaces may be scratched or roller
marks from the printer may appear.
❏ The paper may be curled or wavy after printing,
which may affect color measurement accuracy.
❏ If the paper presser holds the paper without enough
drying time after printing, it leaves marks on the
printed surface which may affect color
measurement accuracy.
For more details, see the printer manual.

Measuring Color

This section introduces the color measuring procedures
using SpectroProofer Utilities which is the operation
tool for this product.
See the online help of the SpectroProofer Utilities for
detailed information.

Starting SpectroProofer Utilities

Follow the instructions below to start SpectroProofer
Utilities.
User's Guide
How To Use
11
Windows
Click Start, point to All Programs, point to
SpectroProofer Utilities, and then click
SpectroProofer Utilities.
Mac OS X
Double-click the hard disk icon, the Applications
folder, Epson Software folder, the SpectroProofer
Utilities folder, and then the SpectroProofer Utilities
icon.

Color calibration

You can perform the color calibration to keep high print
quality with reduced color difference.
We recommend you perform the color calibration once
every two weeks or once a month.
A
Turn on the printer, and then load the paper.
See the printer manual when loading the paper.
U See "Supported Media" on page 9
B
Start the SpectroProofer Utilities.
U See "Starting SpectroProofer Utilities" on
page 11
C
Click Printer Linearization.
Note:
You can start SpectroProofer Utilities from
printer driver's utility screen (Windows) or from
EPSON Printer Utility 4 (Mac OS).