Troubleshooting; When Ink Gets On The Front Or Back Side Of The Paper; When Spectroproofer Utilities Ends With An Error; Something Wrong With Color Measurement - Epson SpectroProofer Mounter 17 User Manual

SpectroProofer Mounter 17"

Troubleshooting

When Ink Gets on the Front or
Back Side of the Paper
Ink attached to the paper presser or the backing could
have been transferred to the paper. If this does happen,
clean the paper presser or the backing.
U See "Maintenance" on page 13
When SpectroProofer Utilities
Ends with an Error
You need to check the error message using Job status
confirmation if the status of the job becomes Error
completion.
You can check the error messages as described below.
A
In the work screen, select Job, and then select
Property.
B
Click the Log tab.
User's Guide
Troubleshooting
19
C
Confirm the message displayed in the Error log.
Something Wrong with Color
Measurement Data
If the color measurement data is something wrong,
confirm the status of SpectroProofer, and perform the
maintenance if necessary.
U See "Maintenance" on page 13