Yamaha RX-V1400 Owner's Manual page 41

_ @0(t RX-VI40(IU EN.book Page 37 Thursday, July 10, 20(13
12:17 AM
+
• Automatically presetting FM stations
You can use the automatic preset tuning feature Io store
FM stations. This function enables this unit to
automatically tune in Io FM stations with strong signals,
and to slore up to 40 (8 stations x 5 groups) of those
stations in order. You can then recall any preset station
easily by selecting the preset station number.
(U.S.A. modeU 1 3 2
1
2
Press FM/AM to select the FM band.
FM/AM i.. M
_ I" I'1
Press TUNING MODE (AUTO/MAN'L MONO)
so that the "AUTO" indicator lights up on the
front panel display.
Lights up
3
Press and hold MEMORY (MAN'L/AUTO FM)
for more than 3 seconds.
The preset number, the "MEMORY" and "AUTO"
indicators flash. After about 5 seconds, automatic
presetting starts from the frequency currently
displayed and proceeds Ioward the higher
frequencies.
MEMORY
cD T_m _._o
_,_, .dilL .....
"+++'+'+++ VP'I "'+" = P,+!- + +
+..N+,+ ,+
• . . O l" + -J
j +
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of the received stations does not reach ES,
automatic preset tuning has automatically stopped at_er
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic p_eset tuning. If the station you
want to store is weak in signal suength, tune in to it manually in
the monaural mode, and store it by tk_llowing the procedure in
"Manually presetting stations".
Automatic preset tuning options
You can select the preset number from which this unit will
slore FM stations and/or begin tuning toward lower
frequencies.
After pressing MEMORY in slep 3:
1 Press A]B/C/D/E, then PRESET_UNING <:1/1:>- to
select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to E8.
2 Press PRESET/TUNING (EDIT) to turn off the colon
(:) and then press PRESET/TUNING <:1to begin
tuning toward lower frequencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnecled from the AC
outlet, or the power supply is temporarily cut due 1o
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
+