Yamaha RX-V1400 Owner's Manual page 74

_ @0(! RX-VI40(IU EN.book Page 7(1 Thursday, July 10, 20(13 12:17 AM
4
You can control Zone 2 or Zone 3 by using
the input selector, STANDBY, SYSTEM
POWER, MUTE and VOL -/+ buttons.
2
aO
i i!i{!_!ili!il ! i!ii_!ii:
5
* VOL 4+ can be used only when VAR. is selected in
ZONE2 SET OUTPUT VOL (page 57).
Press SELECT L_7 to exit from the Zone 2/
Zone 3 mode.
"ZONE2" or "ZONE3" wil! appear in the display window only
when A is pressed, and SYSTM only when V is pressed.
+
• Turning this unit to either on or standby
SYSTEM POWER and STANDBY work differently
depending on the selecled mode thai appem's on the
display window.
• When normal, Zone2 or Zone 3 mode is selected, you
can turn the main unit, Zone 2 or Zone 3 to on/standby
individually.
• When System m_xte is selected, or when YPC is
selected as the amplifier library (L:AMP) code, you
can turn 1he main unit, Zone 2 and Zone 3 to on/
standby all together simultaneously.
LCD display SYSTEM POWER/
STANDBY
Normal mode* name of component
turns the main unit
on/_tandby
Zone 2 mode "ZONE2" or "2:name turns Zone 2 Io on/
of component" standby
Zone 3 mode "ZONE3" or "3:name turns Zone 3 Io on/
of component" slandby
System mode "SYSTM" turns everything (the
main unit, Zone 2,
Z_me3) on/standby
"MAIN" appears fi_r a few seconds when SYSTEM POWER
or STANDBY is pressed.
•
Special
considerations for DTS software
The DTS signal is a digital bitstream. If you attempt 1o
send lhe DTS signal Io the second/third room you will
only hear digital noise (that may damage your speakers).
Thus, the following considerations and adjustments need
to be made when playing DTS encoded discs.
For LDs or DVDs encoded with DTS
Only 2 channel analog audio signals may be sent to the
second/third room.
• for LDs: Set your LD player's lef_ and right oulputs to
the analog soundtrack.
• for DVDs: Use the disc menu 1o set the DVD player's
mixed 2-channel left and right audio outputs Io the
PCM or Dolby Digital soundlrack.
For CDs encoded in DTS
avoid unexpected noise, DO NOT USE the Zone 2/
Zone 3 feature with CDs encoded in DTS.
+
70