Front Panel; Remote Control - Yamaha RX-V1400 Owner's Manual

_ _00 RX-VI40(IU EN.book Page4
Thursday, July 10, 2003 12:17 AM
+
_YAIIAHA
/
o,1.
(U.K. and Europe models only)
O STANDBY/ON
Turns on this unit or sets it 1o the standby mode. When you
turn on this unit, you will hear a click and there will be a 4
to 5-second delay before this unit can reproduce sound.
In standby mode, this unit consumes a small amount of power in
order to receive infrared-signals from the remote controh
• INPUT selector
Selects the input source you want to listen to or watch.
• Remote control sensor
Receives signals from the remote controh
O Front panel display
Shows information about the operational status of this
unit.
PRESET/TUNING EDIT
Switches the function of PRESET/TUNING <:I/I>
between selecting preset station numbers and tuning.
O FM/AM
Switches the reception band between FM and AM.
0
MEMORY (MAN'L/AUTO FM)
SIores a station in the memory. Hold down this button for
more than 3 seconds to start automalie preset tuning.
• TUNING MODE (AUTO/MAN'L MONO)
Switches the tuning mode between aulomalic ("AUTO"
indicator on) and manual ("AUTO" indicalor oft').
O VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
@ SPEAKERS A/B
Turn on or off the set of front speaker,s connected to the A
and/or B terminals on the rear panel at each time the
corresponding button is pressed.
O MULTI CH INPUT
Selecls the source connected to the MULTI CH INPUT
jacks. When selected, the MULTI CH INPUT source takes
priority over the source selected with INPUT (or the input
selector butlons on the remote control).
+
4