Yamaha RX-V1400 Owner's Manual page 59

_ @00 RX-VI400U EN.book Page 55 Thursday, July 10,20(13
?
12:17 AM
•
Input rename
INPUT RENAME
Use this fealure 1o change the name of the inputs on the
OSD and front panel display.
MANUAL SETUP > INPUT MENU > INPUT RENAME >
Cl) - Cl)
-/+ : F'osJtJon
i/v : Chmraoter
+
1
Press an input selector button to select the
input you want to change the name of.
2 Press ( / > to place the_ (under-bar) under
the space or the character you want to edit.
3 Press/x / v to select the character you want
to use and ( / > to move to the next one.
• You can use up to 8 characters for each input.
• Press x/to change the character in the following
order, or press/x 1o go in the reverse order:
A 1o Z, a space, 0 to 9, a space, a 1o z, a space, #, *,
+, ete.
• Repeat steps 1 to 3 to rename each input.
4
Press > repeatedly to exit from INPUT
RENAME.
• External
input
EXT. INPUT
Use this fealure to set the direction of the signals input
inlo the center, subwoofer and surround channels when the
source component is connected 1o the MULTI CH INPUT
jacks. If you are inpuuing 8=channel signals from an
external decoder, use this feature to select jacks for the
additional front signals.
MANUAL SETUP > INPUT MENU > EX'EINPUT >
÷ _6CH 8CH
(FRNI/SS-> FRNI)
CE_IER ->CE_ IER
SI./SR - SI./SR
( .... > $8 )
-/+ Select
±/T ! Up/l)o_n
6ch/8ch
This setting is used 1o select the number of channels input
from an external decoder.
Choices: 6ch, 8ch
FRONT
If you selected 8ch, you can select analog audio jacks to
which front signals from an external decoder will be input.
Choices: DVD, DTV, CBL/SAT, VCR 1, DVR/VCR 2,
MD/TAPE, CD=R, CD, V-AUX
CENTER
Use 1o select where the signals input Io the CENTER jack
will be output.
Choices: CENTER, FRONT
• Select CENTER to output the signals from the center
speaker.
• Select FRONT to output the signals from the front lefl
and right speakers.
SWFR
Use to select where the signals input Io the S UBWOOFER
jack will be output.
Choices: SWFR, FRONT
• Select SWFR to oulput the signals from the subwoofer.
• Select FRONT to output the signals from the front lefl
and right speakers.
SL/SR
Use to select where the signals input to the SURROUND
jacks will be output.
Choices: SL/SR, FRONT
• Select SL/SR to output the signals from the surround
speakers.
• Select FRONT to output the signals from the front lefl
and right speakers.
+
55