LG CodePlus OAT100R Installation & Setup Manual page 27

Set the Tuner Channel
In the Change Channel section of the Tuner Menu screen, you can specify the appropriate
channel number for the tuner.
Note: It is also possible to set tuner channels in the Input Channels screen. See "Modify
Tuner/Output Assignments" on page 35 for further information.
Note: If the system is set for RF 64-QAM output, up to four tuners can be used at a time.
1. Click on the down arrow at the right of the Channel Number field, and select either the
desired channel number or N/C (no connection) from the drop-down list of options.
2. Click on the Set button at the right of the field.
If the channel is set successfully, the system will display
Information display.
206-4218
Configuration Options via GUI (Cont.)
Typical Tuner
Menu Screen
at the bottom of the Tuner
(Continued on next page)
27