LG CodePlus OAT100R Installation & Setup Manual page 63

Configuration Options via Command Line (Cont.)
Identify the Site Location
This option enables you to identify the site in which the OAT100R is installed. If specified as
described below or in the GUI System Setup screen, the site location is identified as part of the
System Information display (available from the Main Menu and Setup Menu).
1. At the Setup Command > prompt, type location and press Enter.
2. At the Enter Location Description: prompt, type a brief description of the location.
Then, press Enter.
The system will prompt for confirmation:
Are you sure you want to set the location description? [y/n]:
3. Either:
• Type y and press Enter to confirm. The system will display confirmation, for example:
Location description has been set.
• Type n and press Enter to return to the Setup Command prompt without specifying a
location.
Exit the Setup Menu
At the Setup Command > prompt, type exit and press Enter to exit the Setup Menu and
return to the OAT100R Main Menu Command > prompt.
Reset the System
This command is also available from the OAT100R Main Menu.
1. At the Setup Command > prompt, type reset and press Enter.
The system will prompt for confirmation:
Are you sure you want to reset the system? [y/n]:
2. Either:
• Type y and press Enter to initiate an immediate reset of the OAT100R. The reset process,
during which each of the tuners will also be reinitialized, may take up to two minutes, after
which the system resumes normal operation.
• Type n and press Enter to return to the Setup Command prompt without resetting the
system.
206-4218
63