Philips 55PW9383 Directions For Use Manual page 15

D;gital equipment with a 1080i or 480p out-
ut, is compatible with the HD INPUT-A V 4
video jacks.
NOTE: This television & designed to be compati-
ble with high-definition signal standards 108(h"
and 480p as specified by the Electronic" Industries
Association standard EIA 770.3. Because output
standards may vary by manufbcture_ you may
encounter some digital equipment that will not
properly display pictures on the TV.
To make the connections shown in this example,
you will need."
• one S-VIDEO cable
• three cablesjbr video connections (standard
RCA connectors)
• jbur cablesjbr audio connections (standard
RCA connectors)
• one coaxial cable (75_2).
NOTE: The cables are not supplied with your TE
You should be able to buy them at most stores"
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.
Connect S-VIDEO and audio cables.
NOTE: This example uses
INPUT-AV 1.You can use INPUT-AV2 or
the side inputjacks if you want.
• Connect an S-VIDEO cable from the HD
receiver's S-VIDEO jack to the TV's
INPUT-AV 1S-VIDEOjack.
• Connect from the HD receiver's AUDIO
L(ett) and R(ight) jacks to the TV's
INPUT-AV 1L(eft) and R(ight) AUDIO
jacks.
Connect component video and audio cables to the TV's HD inputs.
• Connect from the YPRPB jacks on
the HD receiver to the TV's HD
INPUT-AV4 G/Y, R/P1;B/Pb jacks.
• Connect from the HD receiver's AUDIO
L(efl) and R(ight) jacks to the TV's HD
INPUT-AV4 L(eft) and R(ight) AUDIO
jacks.
Connect coaxial cables.
• Connect the coaxial cable lea&in from
your cable outlet, cable converter box, or
VHF/UHF antenna to the tN FROM
ANT jack on the HD receiver.
• Connect a coaxial cable from the OUT
TO TV jack to the ANTENNA IN 75_
jack on the TV.
• Connect the coaxial cable lea&in from a
satellite dish antenna to the SATELLITE
IN jack on the HD receiver.
Refer to the directions-for-use manual that came with the HD receiver for setup
instructions.
Connecting Accessory Devices toYourTV
Coaxr_ Cable
Lea_*in
fiom
_atel[ite
Dish Antenna
• HD receivers will supply stereo sound to the TV only through the audio
left and right cables, not through the coaxial cable.
• Making a standard connection along wilh the HD connection as shown
in 1he example (S-VIDEO) on this page will allow you to see the receiv-
er's on-screen menu and a piclure (valid signal) from the receiver should
it be switched to SD mode.
• The HD INPUT-AV 4 jacks are for standard RCA-type phono plugs.
Your HD receiver may use RCA or BNC oulput jacks. If your HD
receiver comes with BNC jacks, you will need to purchase BNC-to-
RCA adapters to connect the receiver to the TV. You should be able to
purchase these adapters al most stores that sell electronics. Or you can
call our Customer Care Center at 1-800-531-0039.
OR
BNC-to- BNC Adapter
RCA Connector Fitted to
Adapter Connection
RCA
Connector
• The HD INPUT-AV 4 jacks are compatible wilh some digital equipment
having RGB oulputs with "sync on greeff' or RGB with "separate H and V
sync." Output standards for digital equipment, however, may vary by manu-
facturer. No industry standards have been established for HD television RGB
signal systems, liming, synchronization, and signal strengths. If the digital
equipment you want to comlect 1o your TV offers both component video and
RGB outputs, component video is the suggesmd conneclion 1o use.
• The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr.
RGB is also an option. If the piclure color looks grossly incorrect, try
changing either the receiver's or TV's color space. See the receiver's
directions-for-use manual for information on setting its color space. Or
see page 61 in this manual for setting the TV's AV4 color space.
• AV4 and AV5 do not function with the PIP feature. They cannot be dis-
played in the PIP window, nor can the PIP window be displayed when
those signal sources are being viewed on the main screen.
15