Philips 55PW9383 Directions For Use Manual page 9

Connecting Accessory Devices toYourTV
presented here is a connection example
involving a VCR and cable box.
Re[_r to the VCR _ directionsCbr-use manual
.[br fhrther #_[brmation on connections.
To make the connections in this example, you
will need."
• one, two-way signal splitter
• two coaxial cables' (75_))
• one cablejbr a video connection (standard
RCA connectoO
• two cablesjbr audio connections (standard
RCA connectors) (only one cable is' needed
.[br connection to a nonstereo VCR).
NOTE: The cables are not supplied with your
TE You should be able to buy them at most
stores that sell electronics. Or you can call
our Customer Care Center at
1-800-531-0039.
3
4
Connect a cable TV signal to a two-
way signal splitter.
Connect one of the two-way signal
splitter outputs to the INPUT on the
cable box.
Connect the other two-way signal
splitter output to the ANTENNA IN
75_ on the rear of the TV.
Connect from the cable box OUTPUT
jack to the ANT IN jack on the rear of
the VCR.
Connect the VIDEO OUT jack on
the VCR to the INPUT-AV 1 VIDEO
jack on the rear of the TV.
Connect the AUDIO OUT R(ight)
and L(eft)jacks on the VCR to
INPUT-AV 1 AUDIO jacks on the rear
of the TV.
NOTE: If the VCR is a nonstereo unit,
connect only the left audio cable,
which usually has a white connector.
Press the AV button on the remote
control as many times as necessary
to select the AVI source for the view-
ing of malerials from your VCR.
Rear of VCR*
/
J
* (Example: Philips
VCR model
VR674CAT)
I I
/
Rear of TV
000000000 000000000
[]
i
Rear of Cable Box
• The RF outputoll a cable box, usually
labeled "OUTPUT," "OUT," or "TO TV,"
will not pass a stereo sound signal to the
ANTENNA IN 75£2jack on the TV. If, how-
ever, your cable box has separate
Audio/Video outputs, using A/V cables to
comlecl to those outputs and to the A/V
inputs on the TV might pass a stereo sound
signal to the TV. Contact your cable TV
company for more information.
• To simplify making counections, the plugs
on audio aud video cables are often color
coded. The jacks on your TV are likewise
color coded to match the plugs.
The coding is as follows:
--Yellow for video (composite)
--Red for the fight audio channel
_hite for the left audio chaunel
NOTE: If your VCR is mono (hOt, s tereo),
you will connect only one audio cable. You
mus'tensure that the TV is set to MONO for
the sigoal source to which you've connected
the VCR (INPUT-AV 2, INPUT-AV 1, or the
side panel inputs [AV3]). Otherwise, you will
receive sound from only one of the TV's
speakers. See page 38.