Pioneer PDP-502MX Manual page 135

Command
Name
H HCN HIGH CONTRAST NO
HCY HIGH CONTRAST YES
HMD HOUR METER DISPLAY
HPS
HORIZONTAL POSITION
I IDC ID CLEAR
IDS ID SET
IN1 INPUT1
IN2 INPUT2
IN3 INPUT3
IN4 INPUT4
K KLN KEY LOCK NO
KLY KEY LOCK YES
M MMN MIRROR MODE NO
MMX MIRROR MODE X
MMY MIRROR MODE Y
MMZ MIRROR MODE XY
NT4
N TV SYSTEM 4.43 NTSC
NTS TV SYSTEM NTSC
P PAL TV SYSTEM PAL
PCY PC RGB YES
POF POWER OFF
PON
POWER ON
PLN
BRIGHT ENHANCE OFF
PLY BRIGHT ENHANCE ON
PSN POWER SAVE OFF
PS1 POWER SAVE MODE 1
PS2 POWER SAVE MODE 2
R RHI RED HIGH
RLW RED LOW
RSL RED SIDE MASK LEVEL
S SCM TV SYSTEM SECAM
SHP H. SHARPNESS
SHV V. SHARPNESS
SM0 SCREEN MODE 0
SM1 SCREEN MODE 1
SM2 SCREEN MODE 2
SM3 SCREEN MODE 3
SM4 SCREEN MODE 4
SM5 SCREEN MODE 5
STD STD.WHITE BALANCE DATA
SV1 SUB VOLUME INPUT1
SV2 SUB VOLUME INPUT2
SV3
SUB VOLUME INPUT3
SV4 SUB VOLUME INPUT4
T TNT TINT
TVA TV SYSTEM AUTO
U UP0 UP10
UPn UP n
UPF UP FULL
V VOL VOLUME
VPS VERTICAL POSITION
VSI VERTICAL SIZE
Y YCM 3D Y/C MOTION
YCS 3D Y/C STILL
(NOTE) Make sure that you use the SUB VOLUME adjustment commands <SV1~4> only after switching to the required
input using the appropriate input switching command <IN1~4>.
Normal
Full Name
Validity
¶
¶
¶
¶
¶
¶
¶
¶
‡
‡
‡
‡
‡
‡
‡
‡
RS-232C Adjustment Mode
Direct Up/Down
Validity Validity
Turns the HIGH CONTRAST setting OFF
Turns the HIGH CONTRAST setting ON
Lets hour meter appear.
‡ ‡
Adjusts horizontal position.
Clears ID.
Sets ID.
Selects INPUT 1 (RCA or BNC).
Selects INPUT 2 (S-terminal or Y/C).
Selects INPUT 3 (BNC x 5).
Selects INPUT 4 (mini D-sub 15).
Enables controls on display/remote.
Disables controls on display/remote.
Resets mirror mode setting. (normal use)
Sets mirror mode to X (left/right reverse).
Sets mirror mode to Y (up/down reverse).
Sets mirror mode to X/Y (up/down & left/right
reverse).
Sets COLOR SYSTEM to 4.43 NTSC.
Sets COLOR SYSTEM to NTSC.
Sets COLOR SYSTEM to PAL.
Sets INPUT to PC: RGB.
Turns off power.
Turns on power.
Turns off central screen brightness correction.
Turns on central screen brightness control.
Sets power save off.
Sets power save to Mode 1.
Sets power save to Mode 2.
‡ ‡
Adjusts RED HIGH-LIGHT.
‡ ‡
Adjusts RED LOW-LIGHT.
‡ ‡
Adjusts RED SIDE MASK LEVEL.
Sets COLOR SYSTEM to SECAM.
‡ ‡
Adjusts H. SHARPNESS.
‡ ‡
Adjusts V. SHARPNESS.
Sets screen size to original.
Sets screen size to 4:43 Normal.
Sets screen size to full.
Sets screen size to Zoom.
Sets screen size to Cinema Wide.
Sets screen size to Natural Wide.
Resets picture quality and white balance
adjustment data to defaults.
‡ ‡
Adjusts SUB VOLUME of INPUT 1.
‡ ‡
Adjusts SUB VOLUME of INPUT 2.
‡ ‡
Adjusts SUB VOLUME of INPUT 3.
‡ ‡
Adjusts SUB VOLUME of INPUT 4.
‡ ‡
Adjusts TINT.
Sets COLOR SYSTEM to AUTO.
– –
Increase adjustment values by 10.
– –
Increases adjustment values by 10.
– –
Increases adjustment values to maximum.
‡ ‡
Adjusts volume.
‡ ‡
Adjusts vertical position.
‡ ‡
Adjusts vertical size.
Sets motion mode to MOTION.
Sets motion mode to STILL.
Function
135