Pioneer PDP-502MX Manual page 31

Methods of Securing: Basic methods of securing are shown below. Avoid blocking or covering areas aside from those
indicated by
Before attaching the unit to fittings, double-check that the thickness and height of the fittings,
and the number of fixing bolts is correct.
(Also refer to 3.4.1 "Mounting to fittings".)
Temperature Measurement Points (Illustration for reference purposes)
• Make measurements at a distance of 5 cm from the unit, without directly subjecting the thermometer to fan exhaust.
• For spaces where temperature fluctuations are likely, gather additional measurement points for an adequate data set.
Special Installation (Embedding in the wall)
. The methods indicated by a large X-mark must not be used.
50mm 50mm
31